General Modelling

One Cobalt iP Digital “Intelligent Power” DCC Digital Turnout Motor with all installation accessories including mounting screws and double-sided fo...

DCCconcepts Sapphire No-Clean flux is an ideal companion that will make it possible for you to make perfect joints easily every time in electronics...

Its not only HUGE (big enough for double track and more than 8x the cleaning area or otherbrands) – It is also the very best manual track cleaner a...

Decoder Wire -  Stranded 6m (32g) Black. 6 metres (enough for 50+ installations) of Black Stranded 32 gauge Decoder wire.

Exclusively made for DCCconcepts. The HTC is used to cut track that is already laid, and, because the cutting area is much larger when track is cut...

Heat Shrink Black (36 Pack)Fine heat shrink is essential for decoder installations. There is enough in one pack for well over 150 joints.

Zen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and im...

Exclusive to us! We had these sprue cutters made for us, and our brief to the manufacturer was to make them the best available. They succeeded and ...

Weathering Set: Locos and Wagons. This pack contains all the colours you’d find most useful when weathering wagons and locos. From creating rust a...

Zen decoder software has always been smooth, clever and easy to use but our new decoder range takes this to a new level, with simple-to-use ONE ste...

Decoder Wire - Stranded 6m (32g) Red. 6 metres (enough for 50+ installations) of Red Stranded 32 gauge Decoder wire.

Introducing Cobalt-iP Analog – Cobalt-iP Analog is a new Cobalt product that takes the very best features of Cobalt Classic-O and Cobalt Digital-iP...

Weathering Set Track and Environs.This pack contains all the colours you’d find most useful to weather the track and surrounding areas.

Heat Shrink Assorted Colours (36 Pack)An assorted pack of 36pcs total covering all small heatshrink colours. Fine heatshrink is essential for decod...

Brass back-to-back gauge for Standard OO and HO ready to run, plus models built using BRSMB wheel standards OR running on pointwork built using OO-...

Decoder Harness 8 Pin Female (200mm) (3 Pack)A pack of three 8 pin harnesses with a female socket to connect to NEM652/NMRA 8 pin decoders. Colour ...

Sapphire 145 is 0.8mm diameter solder with no peaking and which flows absolutely brilliantly. It has a very narrow melt range which makes quick joi...

3-Wire RGB Ribbon (5m)A 5 metre length of 3-wire ribbon cable for interconnection of all 3-wire switching including Cobalt Alpha (red/green/black) ...

Pre-Etched Sleepers 1.6mm (4mm scale) Straight Track.4mm scale UK prototype sleepering, pre-etched. This fret contains 80 sleepers for plain pointw...

DCC concepts heavy duty BUS wire strippers are the best time saver ever! Save HOURS when installing the main power bus and if you plan well you can...

Two pack. Replacement for DCC-BT2.More a “DCC power management and control” device than a “Bus terminator”, the BSS.2 has several significant benef...

Heat ShrinkRed (36 Pack)Fine heat s hrink is essential for decoder installations. There is enough in one pack for well over 150 joints.

12 pair/sets of top quality easy to install wiper type pickups. These super easy to mount pickups use the classic ‘wiper method’ and are supplied r...

Six Cobalt iP Digital “Intelligent Power” DCC Digital Turnout Motors with all installation accessories including mounting screws and double-sided f...

Zen decoder software has always been smooth, clever and easy to use but our new decoder range takes this to a new level, with super-advanced brown-...

Cobalt Classic Ω Turnout MotorOne Cobalt Classic Ω Turnout Motor with all installation accessories including mounting screws and one of our very po...

Cobalt-SS Crossover pack comprises 2 x Cobalt-SS and AccessoriesEach of the two independent outputs of the Cobalt-SS control board can actually pow...

A box of 100 feet (31metres) of high quality, OO / HO Scale trackbed (3mm thick / scale 9~10″ appx high). Made from very long life EVA, closed cell...

Zen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and im...

One Cobalt-S Signal Box Lever including all installation accessories.Cobalt-S Levers bring a sense of reality to the control of model railways. The...

While we really do prefer soldered connections, there are modellers who are unable or do not want to work under the layout with a soldering iron an...

Zen Series Stay Alive Standard Slimline Installation is easy – just match the blue and black wires to the blue and black stay-alive wires already a...

Zen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and im...

Zen decoder software has always been smooth, clever and easy to use but our new decoder range takes this to a new level, with super-advanced brown-...

Pack of TWO solid brass power distribution bars. The hobby has looked for something like this at an affordable price for a very long time! DCCconce...

Voted by one magazine as “the perfect gift for every railway modeller” this is a really useful product.DCCconcepts Rolling Roads are very easy to u...

Contains Pure Ultrafine Black, Ultrafine Mid Grey, Ultrafine Clay and Pure Red Oxide, as well as all the tools you need to apply the weathering pow...

100 hardened and gold plated pins for fixing of rod stools, track or many other things around the layout.Small and subtle but very strong, the gold...

We had these strippers made for us based on a pair I’d used for over 20 years. We also arranged for our manufacturer to add a second stripping groo...

TWIN Wire Decoder Stranded 6m (32g) Red / Black6 metres of twinned Red and Black Stranded 32 gauge Decoder wire – When it comes to installations, t...

This 6 pin direct plug decoder fits nicely into any locomotive fitted with an NEM651 socket. The decoder offers slow running characteristics and as...

Brass Wool Tip Cleaner – A convenient pot with a wad of activated brass ‘wool’ which will take all excess solder from the tip and give it a great c...

Loco & Rolling Stock LampsAs with all things in the hobby, detail matters.In the real world, no Steam locomotive or early diesel loco ever ran ...

Decoder Wire - Stranded 6m (32g) Yellow. 6 metres (enough for 50+ installations) of Yellow Stranded 32 gauge Decoder wire.

The DCCconcepts Weathering Set – Super Value Pack contains ALL of the powders from our Weathering Set range. Pack contents:Pure WhitePale GreyMid G...

RJ12 6pin Curly Cord For NCE Powercab and Cobalt Alpha – 2m/6ftCan also be used for NCE Procab connections.2m/6ft curly cable with RJ12 connectors ...

Voted by one magazine as “the perfect gift for every railway modeller” this is a really useful product.DCCconcepts Rolling Roads are very easy to u...

Super Sharp Shears are incredibly versatile, with even the more delicate 2″ shear capable of cutting anything up to .015 steel, nickel silver and b...