General Modelling

A highly accurate digital meter for use on DC or DCC layouts. Simple to install and easy to understand.A perfect match for Alpha Panel so you layou...

300mm high quality track feed wires pre-soldered to Legacy Rail Joiners. Compatible with Code 100 track from Legacy and equivalent track from all m...

Cobalt-SS 2 Pack – Small, Reliable, Super-Smooth Above-Board Turnout Motors, ready for DC or DCC use.Cobalt-SS 2 Pack – This pack contains 2x Cobal...

Micro harness 4-way. Pack of 3.

Zen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and im...

Contains Sandstone, Pale Limestone, Terra Cotta and Verdigris & Moss, as well as all the tools you need to apply the weathering powder to your...

2mm/N scale Ballast – Shed/Steam Era (Value Pack) A really well scaled blend that accurately reflects prototype size and is eminently suitable for...

Pack of 25 ‘DCC-Tags’. There is no easier way to mount and secure the power bus (With ZERO need for cutting) than with these tags. Left and right p...

Super-high quality 80 Watt adjustable (with digital control) soldering iron with a 4-core ceramic PTC heater. The ST2080D has a temperature range f...

Fibreglass Brush Refills Fine (5 Pack)

Accessory Decoder CDU Solenoid Drive SX 4-Way with Power-Off Memory and Protective CaseADS-4sx is an easy-to-use 4-way DCC accessory decoder for so...

Accessory Decoder CDU Solenoid Drive SX 2-Way with Power-Off Memory and Protective CaseADS-2sx is an easy-to-use 2-way accessory decoder for soleno...

Zen NANO 8 Pin Direct 4 Function w/Stay Alive.The ZN8D Zen Nano-Direct decoder is smaller than many DCC blanking plugs… It is by far the worlds sma...

6-function 21 to 8 Pin Adapter (3 Pack)Three 21 to 8 pin adapters, making it easy for you to fit an NEM652 8 pin NMRA plug fitted decoder into a lo...

4 x 2-wire LMS/BR Ground Signal – A pack of 4 x 3-lamp plug and play signals in 4mm scale (OO), supplied with NO control board.The DCD-MGS-BR-D is ...

Six Cobalt iP Digital “Intelligent Power” DCC Digital Turnout Motors with all installation accessories including mounting screws and double-sided f...

Cobalt Alpha DCC Power Bus Driver and SNIFFER AdapterThe Alpha Sniffer is a simple and economical way to add a separate DCC accessory power bus to ...

PowerBase Starter Kit OO/HO ScaleFor OO/HO and larger scales. Contains approx. 2.5 Metres of PowerBase Centipede Plates, 6 magnets and 6+ housings,...

A really well scaled blend that accurately reflects prototype size and is eminently suitable for 2mm scale (N Scale) modelling.The Grey mix colour ...

OO/HO scale Ballast – Grey BlendA really well scaled blend that accurately reflects prototype size. The Grey mix colour has been chosen based on fi...

Removes excess solder and cleans up solder joints. Essential for clean kit building in brass and for removal of parts in electronics.Desoldering Br...

Countersunk Screw Set 8x Vials with 60 screws in each.Countersunk head micro-screw set includes 60+ each 1.0x3mm, 1.0x5mm, 1.0x8mm, 1.5x4mm, 1.5x6m...

500 hardened and gold plated pins for fixing of rod stools, track or many other things around the layout.Small and subtle but very strong, the gold...

One Cobalt-S Signal Box Lever including all installation accessories.Cobalt-S Levers bring a sense of reality to the control of model railways. The...

Cobalt Value Pack (Selection of parts and accessories) A combination of tools, accessories and spare parts to make installation Cobalt Motors easy ...

Pre-Etched Sleepers 1.0mm (4mm scale) Straight Track.4mm scale UK prototype sleepering, pre-etched. This fret contains 80 sleepers for plain pointw...

Locomotive Servicing Cradle / Service Cradle – 440mm Perfect for maintaining and servicing OO / HO / EM / P4 locomotives. Complete with secure foam...

Single length of 970mm Bullhead Track – finely-scaled 4mm scale/OO Legacy Bullhead track with “real-steel” high nickel rail, correct chairs and det...

Micro harness 2-way. Pack of 4.

48 springs, sized perfectly for zero friction addition when used to add power pickup on 2.0mm axles (OO and HO standard size).  They are a delight ...

TWIN Wire Decoder Stranded 6m (32g) Yellow/Blue6 metres of twinned Yellow and Blue Stranded 32 gauge Decoder wire – When it comes to installations,...

Trackbed OO/HO Scale 5mm (31m/100ft.) A box of 100 feet (31metres) of high quality, OO/HO Scale trackbed (5mm thick / scale 15″ appx high). Made ...

Cobalt-SS Extension leads. Use these to mount your motors further away from your Control Board. Contains 3 x 1000mm extension cables.

Something special for those who find soldering complex wiring difficult: Three complete harnesses for Cobalt-S levers complete with 9-way spring co...

Weathering Set: Shades of Grey.This pack contains four shades of grey for general layout weathering.

SIX plug & play pre-wired switches – dual red/green Mimic LEDs – (pre-terminated plug-in LEDs).Please use with an SPS-12 split-rail power sup...

OO/HO scale Ballast – Shed/ Steam EraA really well scaled Dark blend that accurately reflects prototype size and is eminently suitable for 4mm scal...

Pan Head Screw Set 8x Vials with 60 screws in each.Pan head micro-screw set includes 60+ each 1.0mm x 3mm, 1.0mm x 5mm, 1.0mm x 8mm, 1.5mm x 4mm, 1...

Trackbed Sheets 3mm (600 x 300mm) (10 Pack)A box of 10 sheets of high quality, 3mm thick track bed for yard areas etc, 300mm x 600mm. Made from ver...

A pack of five extension pins suitable for Peco, Seep, Hornby and Hattons point motors. Each pack includes 5 extension pins and 5 joining collars.

Trackbed N Scale 3mm (31m / 100ft.)A box of 100 feet (31metres) of high quality, N Scale trackbed (3mm thick / scale 18″high). Made from very long ...

Flat Front Type 6x 3mm (w/resistors) Daylight White A pack of 6 x sunny white flat front LEDs with flange. Pack includes 6 x 1k resistors. Sunny wh...

300mm high quality track feed wires pre-soldered to Legacy Rail Joiners. Compatible with Code 75 track from Legacy and equivalent track from all ma...

Trackbed Sheets 5mm (600 x 300mm) (6 Pack)A box of 6 sheets of high quality, 5mm thick track bed for yard areas etc, 300mm x 600mm. Made from very ...

Pack of 50 ‘DCC-Tags’. There is no easier way to mount and secure the power bus (With ZERO need for cutting) than with these tags. Left and right p...

SIX plug & play pre-wired switches – red Mimic LEDs – (pre-terminated plug-in LEDs).Please use with an SPS-12 split-rail power supply.

Back to Back N Scale (Standard) 7.65mmBrass back-to-back gauge for modellers using N scale. – Set to the mid point of standards for universal succe...