General Modelling

Brand: Peco Part Number: PL-80 Scale / Type: HO / OO Scales Our Code: PEPL-80 These new Power Feed Joiners will help address the worrie...

Brand: Peco Part Number: PL-11 Scale / Type: HO / OO Scales Our Code: PL-11 Side mounted turnout motor. Designed to clip into the side ...

These new Power Feed Joiners will help address the worries of soldering that many modellers' have: they're the safe, clean and tidy way of bringing...

18 strand cable ideal for wiring model Railways & similar applications:Rated: 1.4A @ 1000v MaxOutside Diameter: 1.0mm

18 strand cable. ideal for Model Railway layout wiring & similar applicationsRated: 1.4A @ 1000v MaxOutside Diameter: 1.0mm

Brand: Peco Part Number: PL-13 Scale / Type: N / HO / OO / O Scales Our Code: PL-13 simple, inexpensive switch easily fitted underneath...

Provides the short burst of current needed to operate the PL-10 Turnout Motor. May be ganged using the Joining Bar PL-24

Momentary action - toggle springs back to centre (off) position when released.Ideal for operating solenoid motors, such as point motors used on mod...

Plug Together 12 Way Connector Block Set. Rated 6amp Easily cut to required number.

Brand: Peco Part Number: ST-9 Scale / Type: N Scale Our Code: ST-9 PECO Setrack N Gauge Code 80 - Unit trackage System The high quality r...

Decoder Wire -  Stranded 6m (32g) Black. 6 metres (enough for 50+ installations) of Black Stranded 32 gauge Decoder wire.

Brand: Hornby Part Number: R8232 Scale / Type: OO Scale To adapt Hornby points for use with DCC Systems

These new Power Feed Joiners will help address the worries of soldering that many modellers' have: they're the safe, clean and tidy way of bringing...

Pack of 5 SPST Miniature switches. 2 positons: ON/OFF (H 9 x W 13 x D 7mm) Hole required: 6.35mm Rated: 5A/28v DC

Brand: Gaugemaster Part Number: GM56 Scale / Type: HO / OO Scales For modellers who already have their own buffer stops and are busy pop...

Brand: Peco Part Number: PL-26Y Scale / Type: N / HO / OO / O Scales Our Code: PL-26Y Provides a short burst of currents needed to oper...

Code 100 Set Track Power Clip

18 strand cable. ideal for Model Railway layout wiring & similar applications:Rated: 1.4A @ 1000v MaxOutside Diameter: 1.0mm

Brand: Peco Part Number: PL-26W Scale / Type: N / HO / OO / O Scales Our Code: PL-26W Provides a short burst of currents needed to oper...

Push on Terminal Connectors and shrouds. These connectors make modification and fault finding so much easier than soldered wiring. Use them to conn...

Heat Shrink Black (36 Pack)Fine heat shrink is essential for decoder installations. There is enough in one pack for well over 150 joints.

If using LEDs for any other application on the layout that doesn't involve SmartSwitch, then these resistors should be connected to each LED (the l...

Brand: Peco Part Number: PL-27 Scale / Type: N / HO / OO / O Scales Our Code: PL-27 Six-bay panel for use with the Peco clip-in switch...

18 strand cable. ideal for Model Railway layout wiring & similar applications:Rated: 1.4A @ 1000v MaxOutside Diameter: 1.0mm

18 strand cable. ideal for Model Railway layout wiring & similar applications:Rated: 1.4A @ 1000v MaxOutside Diameter: 1.0mm

Decoder Wire - Stranded 6m (32g) Red. 6 metres (enough for 50+ installations) of Red Stranded 32 gauge Decoder wire.

Brand: Peco Part Number: PL-34 Scale / Type: N / HO / OO / O Scales Our Code: PL-34 Wiring Harness to aid wiring Peco points. Pack contai...

5 x Small Type 3Amp 12 Way Connector Blocks

18 strand cable ideal for wiring model Railways & similar applications:Rated: 1.4A @ 1000v MaxOutside Diameter: 1.0mm

Handy for use with the Pecolectrics SmartSwitch these LEDs (Light Emitting Diodes) can be used to give a visual indication of the route set on a tu...

18 strand cable ideal for wiring model Railways & similar applications:Rated: 1.4A @ 1000v MaxOutside Diameter: 1.0mm

Power Clip and Connector for Bachmann EZ Command Controller

Pack containing 2 each of red & black 4mm plugs

A230-12Crocodile ClipsPack containing: 1 x red and 1 x black 30mm crocodile clips.

This track tester works on OO, HO and N Gauge track and enables you to quickly test track for DCC or DC power as well as also helping you to locate...

Brand: Train Tech Part Number: CL2 Scale / Type: HO / OO Scales Our Code: CL2 Instant easy lighting for any coach. Easy to fit in s...