General Modelling

Set of 10 Test Leads, each lead is 50cm long with plastic insulated miniature crocodile clips at each end. Max current 0.5A.Ideal for testing circu...

The pack contains one OO scale Buffer Stop and Light, which is ready to be situated on any section of track. No construction is required to install...

These buffer stop lights offer a quick and simple option to add lighting to your sidings. Ideal for terminus stations, goods yards and modern locom...

Cobalt Alpha DCC Power Bus Driver and SNIFFER AdapterThe Alpha Sniffer is a simple and economical way to add a separate DCC accessory power bus to ...

PowerBase Starter Kit OO/HO ScaleFor OO/HO and larger scales. Contains approx. 2.5 Metres of PowerBase Centipede Plates, 6 magnets and 6+ housings,...

Push to Make Switches pack of 5 switches.Colour - Red

For use with Woodland Scenics "Static King"Input 110V / 240V ACOutpuit: 12V DC 1500mACable length: 121cm (48in)

Some manufacturers support 21 pin decoders in their locomotives. Given that this narrows down the choice of decoders available for modellers to use...

Peco are very happy to be able to offer a complementary motor for their popular turntable kits. Although these were never designed to be motorised ...

The easy way to differentiate your toggle switches. Simply pop them over the end of your toggle switches.This pack contains 12 x White ToggleToppers.

The easy way to differentiate your toggle switches. Simply pop them over the end of your toggle switches.This pack contains 12 x Red ToggleToppers.

Keep your wiring organised and tidy with these self adhesive clips. Pack of 20 clips

FX3 Function outputs for prototypical lighting effects and on/off control: Constant Brightness Lighting with directional or independent control. Op...

Brand: Gaugemaster Part Number: BPGM500    (3 pack of GM500) Scale / Type: N / HO / OO Scales The GM500 is a self latching relay that wo...

Battery box with fly lead-for 2 AA size Batteries.Supplied with 210-16 Fly lead.

Six of the older style ring terminals for connecting wire to controllers. MEASUREMENTS LENGTH 17mm WIDTH 8mm THICKNESS 0.3mm

Micro harness 2-way. Pack of 4.

4MM SR White Tail Lamps Only.  OO Scale

270-18 Analogue Multi Tester • 7 ranges of DC and 4 ranges of AC positions • Easy to read and use • Ideal pocket size for testing electrical and el...

TWIN Wire Decoder Stranded 6m (32g) Yellow/Blue6 metres of twinned Yellow and Blue Stranded 32 gauge Decoder wire – When it comes to installations,...

Instant easy lighting for any coach. Easy to fit in seconds, no wiring No switch, turns on automatically as train moves No pickups, works with regu...

Cobalt-SS Extension leads. Use these to mount your motors further away from your Control Board. Contains 3 x 1000mm extension cables.

10 x Yellow Grain of Wheat Small Bulbs - 3mm diameter for 12v AC or DC operation

Push Button Switches Dimensions: 28mm long 10mm Diameter \n Cut-out reqd: 7mm

Brand: Seuthe Part Number: SEUTHE 22 Scale / Type: HO / OO Scales Our Code: SEUTHE NO22 Smoke generator which can be installed into locom...

Conventional on/off switch for R618 double-isolating track. Supplied with connecting wires.

Max rating @16volts (max) 2AMPS (continuous) or 2.5 amps (passing contact)

Copper Tape (For Bus Bars) 10m x 12mm Current rating 5 amp

Brand: Train Tech Part Number: SD1 Scale / Type: OO Scale Our Code: SD1 Smart Screen is a real working animated screen in miniature which...

SIX plug & play pre-wired switches – dual red/green Mimic LEDs – (pre-terminated plug-in LEDs).Please use with an SPS-12 split-rail power sup...

The GMC-WM3 is a spare or replacement power supply for our Combi controller and the Kato Standard S Controller, the output is 16v AC only. This tra...

The easy way to differentiate your toggle switches. Simply pop them over the end of your toggle switches.This pack contains 12 x Green ToggleToppers.

6 Pin DIN Plug and Socket Set. Standard size DIN Plugs. Overall length: 60mm. Will accept cables up to 6mm diameter. (Suitable for Gaugemaster Cont...

Pack of 20, 1a diodes for use with the GMC-SS1 Super Shuttle. Diodes are designed to only allow current in one direction so another useful tip is t...

A23100 3 Pin DIN Plug and Socket Set. Standard size DIN Plugs. Overall length: 60mm. Will accept cables up to 6mm diameter.

18 strand cable ideal for wiringModel Railways & similar applications:Rated: 1.4A @ 1000v MaxOutside Diameter: 1.0mm

Battery box with fly lead-for 4 AA size Batteries.Supplied with 210-16 Fly lead.

10 x Green 5mm 12v LED

10M of Very Fine Cable BLACKSuper flexible very fine cable ideal for use in Model Railway Carriages, Buildings etc.5 strand 0.10mm.Rated 0.5amp

10M of Very Fine Cable REDSuper flexible very fine cable ideal for use in Model Railway Carriages, Buildings etc.5 strand 0.10mm.Rated 0.5amp

Pack of 5 SPST Sub Miniature switches. 2 positons: ON/OFF (H 8.64 x W 8.13 x D 5.08mm) Hole required: 4.5mm Rated: 5A/28v DC

This unit has a 12vDC 2 amp output with a 3-pin UK plug connected for mains supply. The output is via a 2-pin terminal block so will connect direct...

Flat Front Type 6x 3mm (w/resistors) Daylight White A pack of 6 x sunny white flat front LEDs with flange. Pack includes 6 x 1k resistors. Sunny wh...

Pack of 50 ‘DCC-Tags’. There is no easier way to mount and secure the power bus (With ZERO need for cutting) than with these tags. Left and right p...

SR White Head & Tail Lamps (5), OO Gauge

10 x Red Grain of Wheat Small Bulbs - 3mm diameter for 12v AC or DC operation

SIX plug & play pre-wired switches – red Mimic LEDs – (pre-terminated plug-in LEDs).Please use with an SPS-12 split-rail power supply.

Pack of 5 Miniature Reed Switch. Overall length: 55mm. Body: 18.5mm x 2.6mm. Max Voltage: 220v AC @ 0.5A. Normally Open.