Bachmann Scenecraft

Alpha Mimic Extension Leads – 6pcs 150mm extension leads for Alpha Mimmic LEDs and Ground Signals.You will also need the DCD-MJ6 joiners.

Alpha Mimic Extension Leads – 300mm extension leads for Alpha Mimic LEDs and Ground Signals. (6 pieces)

12v Split-Supply PCB only.Use this PCB with your own power supplies to create a split-rail power supply.

Bullhead Fishplate 4mm scale, 25 pcs pack: These high quality 4mm scale rail joiners have been made to look as realistic as possible and include bo...

Micro harness 8-way. pack of 1.

Micro harness 4-way. Pack of 3.

Micro harness 2-way. Pack of 4.

Alpha AEU-Alpha Switch Wires – Pre-cut and tinned to make connection to Alpha AEU even easier!A pack of 12 ready to use Red, Green and Black wires ...

Micro harness 6-way. Pack of 2.

Cobalt Tiebar Labels (12 Pack) Usable with and highly recommended for all Cobalt variants. Twelve specially prepared, “selectively glued,” colou...

A pack of 12x spare 73mm throw wires and 3x spare wire securing screws compatible with all Cobalt blue motors: Cobalt iP Digital Cobalt iP Analog C...

T-1.2D Tip – A medium D type tip for DCS-ST2065D, DCS-ST60, DCS-ST80 & DCS-AT689A irons. Tip face is a 1.2mm with both a ‘line’ and ‘face’ sold...

T-1C Tip – A medium-small C type tip for DCS-ST2065D, DCS-ST60, DCS-ST80 & DCS-AT689A . Tip face is a 1.0mm angled flat giving you real versati...

T-K Tip for DCS-ST2065, DCS-ST60, DCS-ST80 & DCS-AT689A irons. This type has a shape like a knife and is capable of soldering by applying the t...

Cobalt-SS Extension leads. Use these to mount your motors further away from your Control Board. Contains 3 x 600mm extension cables.

A really well scaled blend that accurately reflects prototype size and is eminently suitable for 2mm scale (N Scale) modelling.The Brown mix colour...

Sapphire 145 is 0.8mm diameter solder with no peaking and which flows absolutely brilliantly. It has a very narrow melt range which makes quick joi...

Mimic Extension Lead Connectors – sold in packs of six, this is the most basic “joiner” for connecting Alpha Mimic extension leads.Because control ...

Multiple Mimic LED Connector, sold in packs of 3, this adapter will let you connect up to six Mimic LEDs to one Mimic output.Join one-to-one or man...

Single length of 970mm Bullhead Track – finely-scaled 4mm scale/OO Legacy Bullhead track with “real-steel” high nickel rail, correct chairs and det...

OO/HO scale Ballast – Grey BlendA really well scaled blend that accurately reflects prototype size. The Grey mix colour has been chosen based on fi...

MEK is a solvent that makes a great job of joining plasticard and styrene with no excess or stringing at all. It is much safer physiologically than...

Fibreglass Brush Refills Fine (5 Pack)

A really well scaled blend that accurately reflects prototype size and is eminently suitable for 2mm scale (N Scale) modelling.The Grey mix colour ...