Bachmann Scenecraft

Modern Station Railings (Pack For Platform) 6 x 137mm railing lengths (822mm total length)2 x 44mm End Of Platform Fences With Gate Product Produce...

Many lamps used on railway platforms, in adjacent streets and in car parks also have speakers or security cameras. This pack includes 12 finely det...

Sapphire 100 (Low Temp Solder) Sapphire 100 is an exciting solder which is designed for use on white-metal and similar alloys. We worked hard to ma...

6-function 21 to 8 Pin Adapter (3 Pack)Three 21 to 8 pin adapters, making it easy for you to fit an NEM652 8 pin NMRA plug fitted decoder into a lo...

Three spare harnesses and connection PCB’s for Cobalt-S wiring.

Using the DCD-NND.3 – Nut Driver SetOne Handle and three of the most important Nut Driver sizes for use with model railways and similar hobbies..Ha...

(Normally off or N.O. momentary type)These detectors have been designed to be very easy to install. Only 4mm in diameter, they will fit between the...

Pre-Etched Sleepers 1.6mm (4mm scale) Straight Track.4mm scale UK prototype sleepering, pre-etched. This fret contains 80 sleepers for plain pointw...

Brass Wool Tip Cleaner – A convenient pot with a wad of activated brass ‘wool’ which will take all excess solder from the tip and give it a great c...

Weathering Set Track and Environs.This pack contains all the colours you’d find most useful to weather the track and surrounding areas.

NANOlight with resistors. 6x (2-Colour) Red/Green. A pack of 6 x red/green ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. 3 wires, ...

A pack of 6 x Prototype white/red ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. 3 wires, common positive. Wire is super-fine 150mm...

Cobalt Right-Angle Adapters w/Mounting Hardware (3 Pack) The Cobalt right-angle adapter will allow you to install your Cobalt motors horizontally, ...

Pre-Etched Sleepers 1.0mm (4mm scale) Straight Track.4mm scale UK prototype sleepering, pre-etched. This fret contains 80 sleepers for plain pointw...

Something special for those who find soldering complex wiring difficult: Three complete harnesses for Cobalt-S levers complete with 9-way spring co...

Weathering Set: Locos and Wagons. This pack contains all the colours you’d find most useful when weathering wagons and locos. From creating rust a...

Contains Pure Ultrafine Black, Ultrafine Mid Grey, Ultrafine Clay and Pure Red Oxide, as well as all the tools you need to apply the weathering pow...

Cobalt Mounting Foam Pads (12 Pack)Twelve custom cut double sided foam mounting pads and specially prepared, “selectively glued,” colour-printed ba...

A pack of three 8-pin harnesses to fit direct plug 6-pin decoders. NEM652 8-pin plug to 6-pin NEM651 socket harness.

Contains Sandstone, Pale Limestone, Terra Cotta and Verdigris & Moss, as well as all the tools you need to apply the weathering powder to your...

Weathering Set: Shades of Grey.This pack contains four shades of grey for general layout weathering.

Micro harness SET. One each 2/4/6/8 way.

Installation PCBs 25x10mm (w/Screws) (12 Pack)Twelve really handy mini PCBs to help you keep complex installations neat and tidy. Supplied with 24 ...

Modern Station Railings – Pack of 6 x 78mm and 2 end pieces for N Scale Picture shows the OO Scale version. DCC Concepts working in partnership wit...

Modern Station Railings – 4 Pack – Grey 4x 137mm railing lengths Total length 54.8cm Suitable for use with the Modern Station Platform Extension Pa...

Two pack. Replacement for DCC-BT2.More a “DCC power management and control” device than a “Bus terminator”, the BSS.2 has several significant benef...

Brass back-to-back gauge for Standard OO and HO ready to run, plus models built using BRSMB wheel standards OR running on pointwork built using OO-...

A pack of five extension pins suitable for Peco, Seep, Hornby and Hattons point motors. Each pack includes 5 extension pins and 5 joining collars.

NANOlight (w/resistors) 6x (1-Colour) Signal Green.A pack of 6 x signal green ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire i...

Pack of TWO solid brass power distribution bars. The hobby has looked for something like this at an affordable price for a very long time! DCCconce...

500 hardened and gold plated pins for fixing of rod stools, track or many other things around the layout.Small and subtle but very strong, the gold...

NANOlight (with resistors) 6 x (1-Colour) Amber. A pack of 6 x amber ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire is super-f...

A pack of 6 x signal red ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire is super-fine 150mm x 0.12mm. Packed with resistor sel...

A pack of 6 x daylight white ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire is super-fine 150mm x 0.12mm. Packed with resistor...

3-Wire RGB Ribbon (5m)A 5 metre length of 3-wire ribbon cable for interconnection of all 3-wire switching including Cobalt Alpha (red/green/black) ...

RJ12 6pin Curly Cord For NCE Powercab and Cobalt Alpha – 2m/6ftCan also be used for NCE Procab connections.2m/6ft curly cable with RJ12 connectors ...

This superb and easy-to-use kit contains everything you need to accurately position DCCconcepts under-board Cobalt motors on your layout.It include...

Brass back-to-back gauge for modellers using NMRA standard PR25 and similar wheelsets running on Peco Code 75 or finer track (inc Shinohara) or run...

Brass back-to-back gauge for modellers using fine scale wheel standards (RP25-88, Gibson, Ultrascale, DCCconcepts Coach wheels).

Back to Back N Scale (Standard) 7.65mmBrass back-to-back gauge for modellers using N scale. – Set to the mid point of standards for universal succe...

300mm high quality track feed wires pre-soldered to Legacy Rail Joiners. Compatible with Code 75 track from Legacy and equivalent track from all ma...

300mm high quality track feed wires pre-soldered to Legacy Rail Joiners. Compatible with Code 100 track from Legacy and equivalent track from all m...

T-2.4D Tip – A medium D type tip for DCS-ST2080D. Tip face is a 2.4mm with both a ‘line’ and ‘face’ soldering area. This tip can be used for solder...

T-3C Tip – A medium C type tip for DCS-ST2080D. Tip face is a 3.0mm angled flat giving you the ideal tip for soldering mid sized brass parts, track...

True-scale, high quality models of the Westinghouse EP Pneumatic Point Motor. Widely used in the UK, Australia and parts of Europe. These accurate ...

Pack of 25 ‘DCC-Tags’. There is no easier way to mount and secure the power bus (With ZERO need for cutting) than with these tags. Left and right p...

Genuine lead shot is becoming nearly impossible as it is no longer available for shotgun use in most countries. Lead remains the best choice for ad...